Ip Setting - TRENDnet TEW-310APB User Manual

IP Setting

This is the page where you configure the IP and DHCP settings of the Access Point.
The default IP address of the Access Point is 192.168.1.1 with the Subnet Mask of 255.255.255.0.
You can type in other values for IP Address, Subnet Mask and Gateway and click "Apply" button
for the changes to be effective.
You can also set the Access Point to obtain the IP from a DHCP server, but it is not recommended.
Once set, it will be difficult to determine the dynamic IP assigned to the Access Point. Select the
option "Obtain IP Automatically" and click " Apply " button for the changes to be effective.
DHCP Server:
It's not recommended to enable the DHCP Server if you have a DHCP server running in your LAN
network, for it will cause possible IP assignment conflict.
Enable the DHCP server function by selecting the option "On", and enter the IP range.
Click " OK " to close pop-up box. Click " Apply " for the changes to be effective.
-18-