Basic Setting - TRENDnet TEW-310APB User Manual

Basic Setting

This is the page where you can change the basic settings of the Access Point with the minimum
amount of effort to adjust a secure wireless network.
AP Name: Name of the AP, which can be used to identify the Access Point among the all the
Access Points in the wireless network.
SSID: Service Set Identifier, which is a unique name shared among all clients and nodes in a
wireless network. The SSID must be identical for each clients and nodes in the wireless network.
Channel: The value of channel that AP will operate in. You can select the channel range of 1 to 11
for North America (FCC) domain, 1 to 13 for European (ETSI) domain and 1 to 14 for Japanese
domain.
WEP Key: To disable WEP security, click on the "Disable " option. To enable WEP security, there
are 3 type of WEP keys to choose from, 64bits, 128bits and 256bits. When one of the 3 WEP key
options is selected, you must enter the value of one of the four Keys in ASCII or HEX format. You
can also enter the values for all four WEP keys, and select one to use.
When AP's WEP security is enabled, all the wireless clients that wish to connect to the
Note!
Access Point must also have WEP enabled with the identical WEP Key value entered.
For the changes made to any of the items above to be effective, click "Apply".
-16-