Download
Share
Print this page
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Wireless Access Point
  5. TEW-450APB - Wireless Super G Access Point
  6. Faq

TRENDnet TEW-450APB Faq

Hide thumbs Also See for TEW-450APB:

Advertisement

Quick Links

Download this manual See also: User Manual
01/16/06
F.A.Q's for TEW-450APB
Q: How do I configure the Access Point through the web-based configuration?
Open your web browser and type the IP address of the TEW-450APB in the
A:
address bar. The default IP address is 192.168.1.1. At the login, enter your
username (admin) and password (admin).
Q: What is the default IP address of my Access Point?
A: The default IP address of the TEW-450APB is 192.168.1.1.
Q: How do I change the IP address of my TEW-450APB?
A:
Open your web browser and type the IP address of the TEW-450APB in the
1)
address bar. The default IP address is 192.168.1.1. At the login, enter your
username (admin) and password (admin).
2) Click on the IP Setting tab at the top of the page.

Advertisement

loading

Related Manuals for TRENDnet TEW-450APB

Summary of Contents for TRENDnet TEW-450APB

  • Page 1 F.A.Q’s for TEW-450APB Q: How do I configure the Access Point through the web-based configuration? Open your web browser and type the IP address of the TEW-450APB in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin).
  • Page 2 A: The default username and password are both “admin”. Q: How do I change the password and username on my TEW-450APB? Open your web browser and type the IP address of the TEW-450APB in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin).
  • Page 3 Q: How do I save or reload the configuration of my Access Point? Open your web browser and type the IP address of the TEW-450APB in the A: 1) address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin).
  • Page 4 Save it to your desktop and extract it. Open your web browser and type the IP address of the TEW-450APB in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin).
  • Page 5 3) Choose your Authentication type and enter your key settings. Q: Where can I find the MAC address of my Access Point? A: The MAC address can be located on the bottom of the TEW-450APB. It can also be found by logging into the unit.
  • Page 6 Q: How do I configure my TEW-450APB in Multiple Bridge mode? The Multiple Bridge feature uses WDS (Wireless Distribution System). The channel and SSID on the remote Access Points must be the same as the TEW-450APB. The remote Access Point must also support WDS.
  • Page 7 3) Select “Multiple Bridge” under the AP Mode section. Click “Apply” then back. Q: How do I configure my TEW-450APB in “Client Mode”? Open your web browser and type the IP address of the TEW-450APB in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin).
  • Page 8 01/16/06 3) Enter in the remote access point’s SSID into the “Remote AP SSID” field. Click “Apply” then back. 4) You can also click on the Site Survey button to display a list of available networks to connect to. Select the desired network and click “Connect”. Note: If you have any pop-up blockers enabled it may prevent the Site Survey window from popping up.
  • Page 9 Q: How do I configure my TEW-450APB in “Repeat Mode”? The Repeat Mode feature uses WDS (Wireless Distribution System). The channel and SSID on the remote Access Points must be the same as the TEW-450APB. The remote Access Point must also support WDS.
  • Page 10 01/16/06 3) Select “Repeat Mode” and enter in the remote access point’s SSID into the “Remote AP SSID” field. Click “Apply” then back. 5) You can also click on the Site Survey button to display a list of available networks to connect to. Select the desired network and click “Connect”. Note: If you have any pop-up blockers enabled it may prevent the Site Survey window from popping up.
  • Page 11 Q: How do I configure my TEW-450APB in “Wireless Bridge” mode? The Wireless Bridge feature uses WDS (Wireless Distribution System). The channel and SSID on the remote Access Points must be the same as the TEW-450APB. The remote Access Point must also support WDS.
  • Page 12 “Remote Bridge MAC” field. Click “Apply” then back. Q: How do I change the channel of my Access Point? Open your web browser and type the IP address of the TEW-450APB in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin).
  • Page 13 4) Click “Apply” then back. Q: How do I change the SSID of my Access Point? 1) Open your web browser and type the IP address of the TEW-450APB in the address bar. The default IP address is 192.168.1.1. At the login, enter your username (admin) and password (admin).
  • Page 14 01/16/06 3) Enter in your desired SSID in the SSID field. 4) Click “Apply” then back.