Restorer; Night Mode; Audio Delay - Denon AVR-889 Owner's Manual

ENGLISH

RESTORER

This function restores compressed audio signals to how they
were before compression and corrects the sense of volume of
the bass and treble to obtain richer playback sound.
[Selectable items]
OFF
:
Do not use RESTORER.
Mode1
(RESTORER 64):
Optimized mode for compressed sources with very weak highs.
Mode2
(RESTORER 96):
Apply suitable bass and treble boost for all compressed sources.
Mode3
(RESTORER HQ):
Optimized mode for compressed sources with normal highs.
The default setting for "iPod" is "Mode3". All others are set to "OFF".
When set to something other than "OFF", "
OFF Mode 1
(RESTORER 64)
Mode 3
(RESTORER HQ)
Operating from the main unit or remote
control unit
RESTORER
Press .
About the RESTORER function
• Such compressed audio formats as MP3, WMA (Windows Media
Audio) and MPEG-4 AAC reduce the amount of data by eliminating
signal components that are hard for the human ear to hear. The
RESTORER function generates the signals eliminated upon
compression, restoring the sound to conditions near those of the
original sound before compression. It also corrects the sense of
volume of the bass to obtain richer sound with compressed audio
signals.
• This is displayed on the menu and can be set when the input source
is selected to "XM" , or analog signals (including AM/FM and SIRIUS
signals) or PCM signals (fs = 44.1/48 kHz) are input.

For details on adjusting individual parameters, see "Adjusting the parameters" (vpage 38).

Night Mode

Optimized setting for late-night listening.
Set the dynamic range compression of the output audio.
[Selectable items]
OFF
: Turn night mode off.
Low
: Low setting.
Mid
: Middle setting.
High
: High setting.
Operating from the remote control unit
[NIGHT]
Press .
The " " indicator lights when "Low", "Mid" or "High" is
selected.
OFF
" is displayed.
NOTE
Mode 2
• When the "Dynamic EQ" setting is "ON" , setting is not possible.
(RESTORER 96)
• When a HD-Audio (DOLBY DIGITAL Plus, DOLBY TrueHD, DTS-HD)
signal is input, the "Night Mode" can not be selected.

Audio Delay

Compensate for mismatched timing between video and audio.
Delay audio.
This sets the delay time for audio signals.
[Variable range]
If you wish to adjust the "Audio Delay" while playing HDMI or
component video signals, press
the audio delay can be adjusted while watching the picture. (Press
again to switch to the on-screen display.)
Press
NOTE
• When operating by remote control, the onscreen display is not
shown.
Low Mid
High
• This cannot be adjusted when playing in the EXT. IN, DIRECT or
STEREO mode (with "Front Speaker" set to "Large", "Tone
Control" to "OFF" and "MultEQ", "RESTORER" and "Night Mode"
to "OFF".)
• When the Auto Lipsync Correction function is operating, you can set
within the range 0 ~ 100 ms.
• Store "Audio Delay" for each input source.
0 ms ~ 200 ms
u to set "OSD" to "OFF". This way
Operating from the remote control unit
[AUDIO DELAY]
then press o p to adjust audio delay.
u