Denon AVR-889 Owner's Manual page 75

Symptom Cause
No sound is • The surround back speaker's
produced from power amplifier is assigned to a
surround back different channel.
speaker. • Surround back speaker setting is
set to "None".
• The "Parameter" – "Surround
Parameter" – "SB CH Out"
settings are "OFF".
• Surround mode not set to a mode
for 6.1- or 7.1-channel playback.
No sound is • Subwoofer's power not turned
produced from on.
subwoofer. • The "Subwoofer" setting at
"Speaker Configuration" is set to
"No" .
• The subwoofer is not properly
connected.
• The subwoofer's volume
turned off.
No test tones are • Surround mode not set to
produced when "STANDARD" (Dolby/DTS
remote control Surround).
TEST
unit's button
is pressed.
DTS sound is not • Blu-ray Disc player / DVD player's
output. audio output setting is not set to
bitstream.
• Blu-ray Disc player / DVD player is
not compatible with DTS sound
playback.
• The AVR-889's "Decode Mode"
setting is set to "PCM" .
HDMI audio • The "Manual Setup" – "HDMI
signals are not Setup" – "HDMI Audio Out"
output from setting is set to "TV" .
speakers.
No sound is • The "Manual Setup" – "HDMI
output from Setup" – "HDMI Audio Out"
the monitor setting is set to "AMP" .
connected
with HDMI
connections.
Dolby TrueHD, • HDMI is not connected.
DTS-HD, Dolby • Blu-ray Disc player audio output
Digital Plus audio setting is not set to bitstream.
is not output.
• Blu-ray Disc player
compatible with DTS sound
playback.
Countermeasure
• Check the setting and change it
as necessary.
• Set to something other than
"None".
• Please set "Parameter" –
"Surround Parameter" – "SB
CH Out" to settings other than
"OFF".
• Select a surround playback
mode.
• Turn on the subwoofer's power.
• Set to "Yes".
• Check the connections.
is • Adjust the subwoofer's volume
to an appropriate level.
• Set to the "STANDARD" (Dolby/
DTS Surround) mode.
• Set the Blu-ray Disc player / DVD
player. For details, refer to the
Blu-ray Disc player / DVD player's
operating instructions.
• Use a DTS-compatible player.
• Set to the "Auto" or "DTS"
mode.
• Set to "AMP" .
• Set to "TV".
• Connect the HDMI.
• Set the Blu-ray Disc player.
For details, refer to the Blu-ray
Disc player player's operating
instructions.
is not • Use a DTS-compatible player.
GVideoH
Page
29 Symptom
No picture • The connections between the
appears. AVR-889 and monitor are faulty.
24
• The monitor's input setting is
wrong.
40, 41
• PURE DIRECT mode is set.
• The player is connected using the
component input connectors, the
monitor is connected using the
36 ~ 38
video (yellow) or S-Video output
connectors.
–
Picture cannot be • Input source does not match
recorded. recorder's
24
connector (video or S-Video).
9
DVDs cannot be
copied on a VCR.
54
37
On-screen display
is not shown.
–
–
33
• The operation content display is
"OFF".
26
• The main volume display is
"OFF".
• The display during tuner operation
26
is "OFF".
• The display during iPod operation
is "OFF".
10, 11
–
GHDMIH
Symptom
HDMI audio • The "Manual Setup" – "HDMI
– signals are not Setup" – "Audio" setting is set
output from to"TV".
speakers.
Cause Countermeasure
• Check the connections.
• Set properly.
• Cancel the PURE DIRECT mode.
• High definition (1080i/720p) and
progressive (480p/576p) video
signals are not down-converted.
Set the player to
(480i/576i) signals.
• The video conversion function
video connection does not work for the REC
OUT connectors. Match the
input source and
connections.
• This is not a malfunction. Most
movie software includes copy
–
prevention signals and cannot be
copied.
• When viewing HDMI
component video signals via the
AVR-889, the on-screen display
MENU
appears when the
on the main unit or the
button on the remote control
unit.
• When only HDMI or component
video signals are input to the
AVR-889, the characters
the on-screen display are not
displayed over the picture.
• Set "Manual Setup" – "Option
Setup" – "On-Screen Display"
– "Text" to "ON".
• Set "Manual Setup" – "Option
Setup" – "On-Screen Display"
– "Master Volume" to "ON" .
• Set when "Manual
– "On-Screen Display" – "Tuner
Information"is not "OFF".
• Set when "Manual
– "On-Screen Display" – " iPod
Information" is not "OFF".
Cause Countermeasure
• Set to "Amp".
ENGLISH
Page
10 ~ 13
–
38
–
interlace
13
recorder
–
or 8
button
A. MENU
8
of
29
30
Setup" 30
Setup" 30
Page
26