Multi-Zone; Connecting The Power Cord; Once Connections Are Completed - Denon AVR-889 Owner's Manual

Multi-zone

ZONE2 Pre-out Connections
If another pre-main (integrated) amplifier is connected, the ZONE2 out
connectors can be used to play a different program source in ZONE2
at the same time (vpage 60 ~ 62).
Pre-main amplifier
(ZONE2)
L R
Extension jack for future use.
(Connect devices corresponding with
L R
room to room function to this jack.)
Input
Output
Infrared Infrared
retransmitter sensor
NOTE
• For the audio output, use high quality pin-plug cords so that no
induction humming or noise is produced.
• For instructions on installing and operating separately sold devices,
refer to the respective devices' operating instructions.
• To conduct multi-zone playback, see "Amp Assign / Multi-zone
Connections and Operations" (vpage 60 ~ 62).

Connecting the Power Cord

Wait until all connections have been completed before connecting the
power cord.
Connection to the AC outlets
• These outlets supply power to external audio
equipment.
• The power supplied from these outlets turns
on and off together with the set's power
switch.
• Audio equipment
consumption of 120 W (1 A) can be
connected.
Power cord
(supplied)
NOTE
• Insert the AC plugs securely. Incomplete connections could cause
noise.
• Only use the AC outlets to plug in audio equipment. Do not use
them as power supplies for hairdryers or anything other than audio
equipment.
Once Connections are
Completed
Turning the Power On
(vpage 46)
with a total power
To household
power outlet
(AC 120 V, 60 Hz)
ENGLISH