Setting The Restorer Mode - Denon AVR-X500 Owner's Manual

Contents

Setting the RESTORER mode

RESTORER
Front panel Display
Connections Playback
Rear panel
Settings
Compressed audio formats such as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The RESTORER
mode generates the signals eliminated upon compression, restoring the
sound to conditions near those of the original sound before compression.
It also restores the original bass characteristics for a rich and expanded
tonal range.
1
Press RESTORER.
The RESTORER mode screen is displayed on the TV screen.
On : Use RESTORER mode.
Off (Default) : Do not use RESTORER mode.
%
• This item can be set with analog signals or PCM signal (Sample Rate = 44.1/48
kHz) is input.
• "RESTORER" settings are stored for each input source.
• This cannot be set when the surround mode is set to "DIRECT".
68
Remote
Tips Appendix
Index