Media Card Reader
8 Insert the Media Card Reader and slide it into place until it is fully seated.
9 Route the FlexBay USB cable through the cable routing clip.
10 Replace the computer cover (see "Replacing the Computer Cover" on page 101).
CD/DVD Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
Removing a CD/DVD Drive
1 Follow the procedures in "Before You Begin" on page 59.
2 Remove the computer cover (see "Removing the Computer Cover" on page 65).
3 Remove the drive panel (see "Removing the Drive Panel" on page 80).
96
Removing and Installing Parts
FlexBay USB
cable