5 Disconnect the FlexBay USB cable on the back of the Media Card Reader from the Media Card
Reader connector on the system board (see "System Board Components" on page 67) and route the
cable through the cable routing clip.
sliding plate
Media Card Reader
6 Slide the drive latch release toward the bottom of the computer and, without releasing the drive latch
release, slide the Media Card Reader out through the front of the computer.
7 Replace the drive panel (see "Replacing the Drive Panel." on page 82).
8 Replace the computer cover (see "Replacing the Computer Cover" on page 101).
94
Removing and Installing Parts
drive latch release