Datamax W-6208 Operator's Manual page 73

Advanced Entry Calibration (continued)
Step Operator Action
13 Using the
select the Gain Number
determined in Step 12.
Press the
select the setting.
14 Place the media in the
Media Sensor. Record
the sensor reading and
label it 'P' (paper).
Place the backing, mark,
or notch in the Media
Sensor. Record the
sensor reading and label
it 'G' or 'M' (Gap or
Mark).
Remove all media.
Record the sensor
reading and label it 'E'
(Empty).
15 Press the
Then press the
key.
W-Class
Displayed Message
key,
key to
Or, for reflective media:
Or, for reflective media:
key.
Comment
Selection is
denoted with an
'*'.
Where 'yyy' is
a numerical
value
representing the
current sensor
reading.
The sensor
readings must
be manually
entered into the
printer now.
63