7-6.3. All Motion ON / OFF, Sensitivity and Velocity Setting
▫ Click the
window will be displayed as shown in
▫ By clicking the mouse, select the
) to enable the system to start recording by motion detection for all the channels.
Fig.7-57
▫ By clicking the mouse, select the
) to disable the system to start recording by motion detection for all the channels.
Fig.7-57
▫ By clicking the mouse, select the
(See
) and choose one of the sensitivity among LOW, 1, 2, 3 and HIGH for all the
Fig.7-57
channels with the mouse's wheel, and then click it to save.
▫ See section 6-8.1 through 6-8.5
recording.
button in the RECORD menu and the ALL MOTION setup pop-up
[Fig.7-57].
on page 52 through 55
[Fig.7-56 All Motion Setup button]
[Fig.7-57 All Motion Setup pop-up window]
[Fig.7-58 All Motion Sensitivity setup button]
on the pop-up window (See
on the pop-up window (See
for more information related to
99
7. Setup
on the pop-up window