Table of Contents
Advertisement
System Instruction Manual
8-3. Internet Explorer
When you are trying to use this function, it is highly recommended that the password should
be turned ON in the SYSTEM menu not to enable unauthorized personnel to access your
DVR system (See section 7-2.3).
Up to 10 users can remotely access your DVR with the HOST NAME.
How to setup the Internet Explorer
•
Registration to the
•
In the IP address box of Microsoft Internet Explorer, type the HOSET NAME (See
you entered in the DDNS menu and the PORT NUMBER of the DVR system, and then
you will be asked to install the AciveX control software (See
protocol (http://), the host name (example: cloverdvr1.dyndns.org) and the port
number (:5800) in the IP Address box as follows.
www.dyndns.org
(See section 7-7.6
[Fig.8-2 Host Name]
[Fig.8-3 COMBO VIEWER- Windows Internet Explorer]
130
on page
122).
). You should type the
Fig.8-3
)
Fig.8-2
Advertisement
Table of Contents
