7-3.1. Hdd Write Fail; 7-3.2. Hdd Overwrite; 7-3.3. Format - Clover LCD2284DVR Instruction Manual

7-3.1. HDD WRITE FAIL

If a HDD is in full and the OVERWRITE on the HDD is turned OFF in the recording mode, the
system will activate the relay output (See section 5-4.3) for a siren or other device.
Click the HDD WRITE FAIL button in the DISK MANAGER window and select one among
▫
RELAY 1 OUT, RELAY 2 OUT, RELAY 3 OUT, RELAY 4 OUT or DISABLE.

7-3.2. HDD OVERWRITE

▫ Click the mouse on the OVERWRITE button to select the ON or the OFF. If the ON is
selected, the system continues recording by overwriting start from the first index of the
recorded file even though the space of HDD is in full. If the OFF is selected, the system will
stop recording when the space of HDD is in full.

7-3.3. Format

When you install the new Hard Disk Drives (HDD), it should be formatted before recording.
Formatting is possible only when the system is in the LIVE mode.
▫ Click the "HDD or USB" button to format and the HDD or USB FORMAT message box will
be displayed (See
▫ Click the "OK" button, and you can see the formatting process of the HDD.
▫ Click the "CANCEL" button to return to the Disk Manager.
[Fig. 7-23 HDD Write Fail button]
[Fig.7-24 Overwrite button]
).
Fig.7-25
85
7. Setup