Modifying LAG Membership
1. Click Bridging > Port Management > LAG Management. The LAG Management Page opens:
2. Click the Edit button. The Edit LAG Membership Page opens:
3. Define the relevant fields.
4. To assign ports to a LAG, click the port numbers in the Port List and then click the Right Arrow
button. The port number then appears in the LAG Members list.
Conversely, to remove a port from a LAG, click the port number in the LAG Members list and
then click the Left Arrow button.
5. Click Apply. The LAG membership is defined, and the device is updated.
Chapter 6: Configuring Device Interfaces
Defining LAG Management
SFE1000P Gigabit Ethernet Switch Administration Guide
Edit LAG Membership Page
Chapter
6
47