Cisco SFE1000P Administration Manual page 79

To define Multicast groups:
1. Click Bridging > Multicast> Multicast Groups. The Multicast Group Page opens:
2. Click the Add button. The Add Multicast Group Page opens:
3. Define the relevant fields.
4. Click Apply. The Multicast Group settings are modified, and the device is updated.
Chapter 10: Configuring Multicast Forwarding
Defining Multicast Bridging Groups
SFE1000P Gigabit Ethernet Switch Administration Guide
Multicast Group Page
Add Multicast Group Page
Chapter
10
71