Configuring Policy Table - Cisco SFE1000P Administration Manual

Configuring Policy Table

In the Policy Table Page, QoS policies are set up and assigned to interfaces.
1. Click Quality of Service > Advanced > Policy Table. The Policy Table Page opens:
2. Click the Add button. The Add QoS Policy Profile Page opens:
3. Add a QoS policy profile.
4. Click Apply. The QoS policy profile is added, and the device is updated.
Chapter 13: Configuring Quality of Service
Defining Advanced Mode
SFE1000P Gigabit Ethernet Switch Administration Guide
Policy Table Page
Add QoS Policy Profile Page
Chapter
13
109