System Management > Factory Default; Factory Default; System Management > Firmware Upgrade; Firmware Upgrade - Cisco RV016 User Manual

Chapter 4
System Management > Diagnostic > Ping
Ping host or IP address
Enter the IP address of the device
being pinged, and click Go. The test will take a few seconds
to complete. Then the Router will display the results.
Status
The status of the ping test is displayed.
Packets
The number of packets transmitted, number
of packets received, and percentage of packets lost are
displayed.
Round Trip Time
The minimum, maximum, and average
round trip times are displayed.
System Management > Factory Default
Use this screen to clear all of your configuration information
and restore the Router to its factory default settings. Only
use this feature if you wish to discard all the settings and
preferences that you have configured.
System Management > Factory Default

Factory Default

Return to Factory Default Setting
Factory Default Setting if you want to restore the Router
to its factory default settings. After clicking the button, a
confirmation screen appears. Click OK to continue.
10/100 16-Port VPN Router
Click Return to
Advanced Configuration
Factory Default Confirmation
System Management > Firmware Upgrade
You can use this feature to upgrade the Router's firmware
to the latest version.
System Management > Firmware Upgrade

Firmware Upgrade

To download the firmware, refer to the Firmware Download
instructions. If you have already downloaded the firmware
onto your computer, then click the Browse button to look
for the extracted file.
Firmware Upgrade Right Now
the extracted file, click Firmware Upgrade Right Now.
NOTE:
The Router will take approximately ten
minutes to upgrade its firmware. During this
process, do not power off the Router or press
the Reset button.
Firmware Download
Firmware Download from Linksys Web Site
to download the latest version of the Router's firmware,
click Firmware Download from Linksys Web Site. The
Support page of the Linksys website appears.
Follow the on-screen instructions to access the Downloads
page for the 10/100 16-Port VPN Router (model number:
RV016). Then download the firmware upgrade file.
Extract the file on your computer. Then follow the Firmware
Upgrade instructions.
System Management > Restart
If you need to restart the Router, Linksys recommends that
you use the Restart tool on this screen. When you restart
After you have selected
If you need
30