Cisco RV016 User Manual page 53

Chapter 4
IP Only
The default is IP Only. Only the computer with a specific IP
address will be able to access the tunnel. Select IP address
or IP by DNS Resolved.
Remote Client > IP Only
IP address Select this option if you know the static IP
address of the remote computer at the other end of the
tunnel, and then enter the IP address.
IP by DNS Resolved
Select this option if you do not know
the static IP address of the remote computer but you do
know its domain name. Then enter the remote computer's
domain name on the Internet. The Router will retrieve the
IP address of the remote VPN device via its public DNS
records.
IP + Domain Name(FQDN) Authentication
The IP address and domain name ID must match the Local
Gateway of the remote computer, and they can only be
used for one tunnel connection.
Remote Client > IP + Domain Name(FQDN) Authentication
IP address
Select this option if you know the static IP
address of the remote computer at the other end of the
tunnel, and then enter the IP address.
IP by DNS Resolved Select this option if you do not know
the static IP address of the remote computer but you do
know its domain name. Then enter the remote computer's
domain name on the Internet. The Router will retrieve the
IP address of the remote VPN device via its public DNS
records.
Domain Name Enter the domain name as an ID (it cannot
be a real domain name on the Internet).
IP + E-mail Addr.(USER FQDN) Authentication
Remote Client > IP + E-mail Addr.(USER FQDN) Authentication
IP address
Select this option if you know the static IP
address of the remote computer at the other end of the
tunnel, and then enter the IP address.
IP by DNS Resolved
Select this option if you do not know
the static IP address of the remote computer but you do
know its domain name. Then enter the remote computer's
domain name on the Internet. The Router will retrieve the
10/100 16-Port VPN Router
Advanced Configuration
IP address of the remote VPN device via its public DNS
records.
E-mail address
Enter the e-mail address as an ID.
Dynamic IP + Domain Name(FQDN) Authentication
The Local Security Gateway will be a dynamic IP address,
so you do not need to enter the IP address. When the
Remote Security Gateway requests to create a tunnel with
the Router, the Router will work as a responder.
The domain name must match the local setting of the
remote computer and can only be used for one tunnel
connection.
Remote Client > Dynamic IP + Domain Name(FQDN) Authentication
Domain Name
Enter the domain name for authentication.
(Once used, you cannot use it again to create a new tunnel
connection.)
Dynamic IP + E-mail Addr.(USER FQDN) Authentication
The Remote Security Gateway will be a dynamic IP
address, so you do not need to enter the IP address. When
the remote computer requests to create a tunnel with the
Router, the Router will work as a responder.
Remote Client > Dynamic IP + E-mail Addr.(USER FQDN) Authentication
E-mail address Enter the
authentication.
Group VPN
Group No The group number is automatically generated.
(The Router supports up to two group VPNs.)
Group Name
Enter a name for this group VPN, such as
American Sales Group or West Coast Marketing. This allows
you to identify multiple group VPNs and does not have to
match the name used at the other end of the tunnel.
Interface
Select the appropriate WAN port.
Enable
Check this box to enable a group VPN.
Local Group Setup
Local Security Group Type
Select the local LAN user(s) behind the Router that can
use this VPN tunnel. Select the type you want to use: IP,
Subnet, or IP Range. Follow the instructions for the type
you want to use.
e-mail address for
46