Access Rule Setup - Cisco RV016 User Manual

Chapter 4
8. If you want to save your changes, click
Click Previous if you want to return to the previous
screen. Click Exit if you want to exit the Setup Wizard.
Save Settings
9. A screen appears to notify you that the settings have
been saved. To proceed to the Wizard screen, click
OK. To proceed to the System > Network screen, click
Cancel.

Access Rule Setup

Launch Now to run the Access Rule Setup
1. Click
Wizard.
2. This screen explains the Access Rules, including the
Router's Default Rules. Click Next to continue. Click
Exit if you want to exit the Setup Wizard.
Access Rules Policy
10/100 16-Port VPN Router
Save Settings.
3.
4.
Advanced Configuration
From the drop-down menu, select
depending on the intent of the Access Rule.
Click Next to continue. Click Previous if you want to
return to the previous screen. Click Exit if you want to
exit the Setup Wizard.
Select the Action
Select the service you want from the
menu.
Click Next to continue. Click Previous if you want to
return to the previous screen. Click Exit if you want to
exit the Setup Wizard.
Select the Service
Allow or Deny
Service pull-down
58