Trap Setting - TRENDnet TEG-448WS User Manual

Trap Setting

By configuring the Trap Setting, it allows Web Management Utility to
monitor specified events on this Web-Smart Switch. By default, Trap
Setting is Disabled. When the Trap Setting is Enabled, enter the
Destination IP address of the managing PC that will receive trap
information.
System Events: Monitoring the system's trap.
Device Bootup: a trap when booting up the system.
Illegal Login: a trap when there is using a wrong password login,
and it will record from where the IP to be login.
Fiber Port Event: Monitoring the Fiber port status.
Link Up/Link Down: a trap when there is linking status happens in
mini-GBIC connection.
Twisted Pair Port Event: Monitoring the twisted pair port status.
Link Up/Link Down: a trap when there is linking status happens in
1000BASE-T connection.
Figure 29. Trap Setting
62