TRENDnet TEG-448WS User Manual page 28

View Trap: : The Trap function can receive events that occur from
the Web Management Switch listed in the Monitor List. For
information on Trap settings using the Web Management Utility refer
to the Trap Setting section in the manual.
There is a light indicator near the "View Trap" button. A Green light
indicates that there has not been any new trap information transmitted.
A Red light indicates new trap information being transmitted and is
set as a reminder to view the trap. (Figure 9)
When the "View Trap" button is clicked, a Trap Information window
will pop out, it will show the trap information including the Symbol,
Time, Device IP and the Event occurred. (Figure 10)
The symbol " " represents the trap signal arise, this symbol will
disappear after you review and click on the event record.
Note: In order to receive Trap information, switch has to be configured with
Trap IP and Trap Events in Web browser, which are available in the Trap
Setting Menu (see Page 62 for detail).
Add Item: To add a device to the Monitor List manually, enter the IP
Address of the device that you want to monitor.
Delete Item: To delete the selected device in the Monitor List.
Figure 9. View Trap button
Figure 10. Trap Information
26