Note: 1. After hardware installation is complete, use the Web Smart Switch Management Utility to configure the TEG-424WS. To access the Web Smart Switch Management Utility, open your web browser, and enter the default IP Address http://192.168.0.1 and default password "admin". Make sure your computer and the TEG-424WS are configured to the same network segment.
Page 3
1. Connect the Power Cord to the TEG-424WS and then to a power outlet. 2. Connect a RJ-45 network cable from the computer to an available Ethernet port of the TEG-424WS. For more information regarding the Web Smart Switch Management Utility configuration and advanced settings, please refer to the User's Guide included on the provided CD-ROM or TRENDnet's website at www.trendnet.com...
2. Check that the power outlet is receiving power. 2. When I access the TEG-424WS using a web browser, I get a screen that tells me “only one user can login”. What should I do? Another computer is configuring the TEG-424WS. Please wait until the user logs off.