Device Setting - TRENDnet TEG-448WS User Manual

Device Setting

You can set the device by using the function key in the Device Setting
Dialog box.
Configuration Setting: In this Configuration Setting, you can set the
IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP Address),
System name, Location and DHCP function.
Select the device in the Discovery list or Monitor List and press this
button, then the Configuration Setting window will pop out as Figure
10, after filling up the data that you want to change, you must fill up
the password and press the "Set" to process the data changed
immediately. The default password of this TEG-448WS 48-Port
10/100/1000Mbps Gigabit Ethernet Web Smart Switch configuration
is "admin".
Figure 11. Configuration Setting
Password Change: You can use this Password Change when you
need to change the password, fill in the password needed in the dialog
box and press "Set" button to proceed the password change
immediately.
Figure 12. Password Change
27