Identifying External Components; Front Panel - TRENDnet TEG-448WS User Manual

IDENTIFYING EXTERNAL COMPONENTS

This chapter describes the front panel, rear panel, and LED indicators
of the Switch.

Front Panel

The figure below shows the front panels of the Switch.
Figure 4. Front panel
LED Indicators:
Comprehensive LED indicators display the status of the switch and
the network (see the LED Indicators chapter below).
1000BASE-T Gigabit Ethernet Ports (Port 1~48):
The Switch has forty-eight Gigabit twisted pair ports, supported auto
negotiable 10/100/1000Mbps and auto MDI/MDIX crossover detection
function gives true "plug and play" capability, just need
function, this
to plug-in the network cable to the hub directly and don't care if the
end node is NIC (Network Interface Card) or switch and hub.
These
ports can operate in half-duplex mode for 10/100Mbps and full- duplex mode
for 10/100/1000Mbps.
Note: When the port is set to "Forced Mode", the Auto MDI/MDIX
will be disabled.
19