Setting The Printer Frame Type - Canon imagePROGRAF W6400 User Manual

NetWare Settings (Windows)

Setting the Printer Frame Type

Before setting the printer protocol, you must set the frame
type to enable communication between the printer and the
computer. Use the utility below to perform this setting.
GARO Device Setup Utility (→ P.5-34)
Printer operation panel (→ P.5-35)
Important
In order to use GARO Device Setup Utility, it must be
installed on your computer. Install GARO Device Setup
Utility on your computer. (
Before setting the printer frame type, confirm that the
printer is switched on and connected to the network.
5- 34
→
P.5-34)
Setting the frame type with GARO Device
Setup Utility
If you are using Windows, use the GARO Device Setup
Utility, the software utility provided with the printer, to
perform the printer network settings.
1
On the desktop, click the Start button, point
to Programs, then select GARO Device
Setup Utility > GARO Device Setup Utility.
2
Select from the list the name of the printer
you want to set, then select Protocol
Settings from the Printer menu.
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index