Handling rolls
Loading Rolls in the Printer
Follow these steps to load rolls in the printer.
Note
•
Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide.
If these areas are dirty, we recommend cleaning them in advance. (→P.647)
1.
Press the Load button.
2.
Press ▲ or ▼ to select Load Roll Paper, and then press the OK button.
Note
•
If any paper has been advanced that will not be used, a message is shown requesting you to
remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the
next step.
3.
Positioning your hands as shown, open the Roll Cover.
106 Handling Paper