Handling Rolls; Attaching The Roll Holder To Rolls - Canon imagePROGRAF iPF750 User Manual

Handling rolls

Attaching the Roll Holder to Rolls

When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes
equipped with the 2-Inch Paper Core Attachment installed.
Using Rolls with a 2-Inch Paper Core
Holder Stopper (Left Side) Roll Holder (Right Side)
2-Inch Paper Core
Attachment
Caution
•
Set the roll on a table or other at surface so that it does not roll or fall. Rolls are heavy, and dropping a
roll may cause injury.
Important
•
When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. We
recommend wearing clean cloth gloves when handling rolls to protect the printing surface.
•
Use scissors or a cutting tool to cut the edge of the roll paper if it is uneven, dirty, or has tape residue.
Otherwise, it may cause feeding problems and affect the printing quality. Be careful not to cut through
any barcodes printed on the roll.
•
Align the edges of the paper on both ends of the roll. Misalignment may cause feeding problems.
Note
•
For details on supported sizes and types of rolls, see "Paper Sizes" or the Paper Reference Guide.
(→P.100) (→P.95)
•
To view instructions as you attach the Roll Holder, press the Navigate button. (→P.29)
No Attachment Needed
Using Rolls with a 3-Inch Paper Core
Holder Stopper (Left Side) Roll Holder (Right Side)
3-Inch Paper Core
Attachment L
Handling rolls
3-Inch Paper Core
Attachment R
Handling Paper 103