Menu Settings - Canon imagePROGRAF iPF750 User Manual

Menu Settings

Menu items are as follows.
For instructions on selecting menu items, see "Menu Operations". (→P.32)
For details on menu levels and values, see "Menu Structure". (→P.35)
Paper Menu
Load Paper
Eject Paper
Chg. Paper Type (*1)
Chg. Paper Size
ManageRemainRoll
Paper Details (The type
of paper is
displayed
here.)(*1)
Setting Item
Head Height
Skew Check
Lv.
Cutting Mode
Cut Speed
Trim Edge First If a roll is loaded, the end of the paper will be cut.
CutDustReduct. If you choose On, a line will be printed at the cut
Description, Instructions
Select sheets or rolls and load the paper.
Choose this item before removing loaded paper.
Change the type of paper loaded. (→P.110)
Change the size of paper loaded. (→P.112) (→P.100)
Choose On to print a barcode at the end of a roll
before you remove it. The printed barcode can
be used in managing the amount of roll paper left.
Choose Off if you prefer not to print the barcode.
(→P.126)
Adjust the Printhead height. (→P.611)
If you print on Japanese paper (washi) or other
handmade paper that has an irregular width, choose
Loose for a higher skew detection threshold, or
choose Off to disable skew detection. However, if
paper is loaded askew when detection is Off, note
that paper jams or Platen soiling may occur.
Specify whether or not to cut with the standard
round-bladed cutter.
Choose Automatic to have the roll cut automatically
after printing. If you choose Manual, the paper will
not be cut after printing. Instead, a line will be printed
at the cut position.
Choose Eject if you prefer not to have documents
dropped immediately after printing, as when waiting
for ink to dry.
Choose the cutting speed. If you use adhesive paper,
choosing Slow helps prevent adhesive from sticking
to the cutter and keeps the cutter sharp.
position when paper cutting is selected. This option
reduces the amount of debris given off after cutting.
It also helps prevent adhesive from sticking to the
cutter and keeps the cutter sharp if you use adhesive
paper. (→P.134)
Control Panel
Printer Parts 49