Scan To Network - Brother MFC-9460CDN Software User's Manual

Network Scanning
g
Press a or b to choose PDF, PDF/A, Secure PDF, Signed PDF, JPEG or XPS.
Press OK, and go to step i.
h
Press a or b to choose PDF, PDF/A, Secure PDF, Signed PDF or TIFF. Press OK, and go to step j.
Note
• If you choose Secure PDF, the machine will ask you to enter a 4 digit password using numbers 0-9 before
it starts scanning.
• If you choose Signed PDF, you must install and then configure a certificate to your machine using Web
Based Management.
i
Press a or b to choose Small, Middle or Large.
Press OK and go to step j.
j
Do one of the following:
 If you want to start scanning, press Black Start or Color Start and go to step m.
 If you want to change the file name, go to step k.
k
Press a or b to choose a file name you want to use and press OK. Press Black Start or Color Start and
go to step m.
Note
If you want to change the file name manually, go to step l.
l
Press a or b to choose <Manual>. Press OK.
Enter the file name you want to use (up to 15 characters) and press OK.
Press Black Start or Color Start.
m
The LCD shows Connecting. When the connection to the FTP server is successful the machine starts
the scanning process.
Note
Scan type depends on the settings in Web Based Management, Black Start or Color Start do not change
the settings.

Scan to Network

When you choose Scan to Network, you can scan documents directly to a shared folder on a CIFS server
located on your local network or the internet. (For more information about CIFS servers, see the Network
User's Guide.) The Scan to Network feature supports Kerberos and NTLMv2 authentication.
The details required to use Scan to Network can be entered by using Web Based Management to
pre-configure and store the details in a Scan to Network profile. The Scan to Network profile stores user
information and configuration settings for use on a network, or the internet.
13
13
214