Scanning
Scanning an image into your Macintosh
You can scan a whole page, or scan a portion after pre-scanning the document.
Scanning a whole page
a
Load your document.
b
Adjust the following settings, if needed, in the Scanner Setup dialog box:
Resolution
Scan Type
Document Size
Adjust Image
• Brightness
• Contrast
c
Click Start.
When scanning has finished, the image appears in your graphics application.
Scanning a duplex (two sided) document (For MFC-9560CDW)
a
Load your document.
b
Check Duplex (two-sided) Scanning and choose Long-edge binding or Short-edge binding.
c
Adjust the following settings, if needed, in the Scanner Setup dialog box:
Resolution
Scan Type
Document Size
Adjust Image
• Brightness
• Contrast
9
9
9
9
152