Table of Contents
Advertisement
10
Brother Network PC-FAX
software
To use the MFC with Network PC-FAX, the optional NC-9100h
Network board must be installed into the MFC and configured with a
TCP/IP address. If you use PC-FAX to an E-mail address, the mail
server settings must also be configured.
Enable Network PC-FAX
To use the MFC for Network PC-FAX, see Using Brother PC-FAX
software on page 7-1.
The items described in this chapter are specific items relating to
the Network version of PC-FAX software that is installed from
the Network Applications for Optional NC-9100h on the
CD-ROM supplied with your MFC.
Brother Network PC-FAX can be configured through PC-FAX Setup,
Sending tab.
BROTHER NETWORK PC-FAX SOFTWARE 10 - 1
Advertisement
Table of Contents
