Table of Contents
Advertisement
8
en | Preparing for installation
3
Preparing for installation
3.1
Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all parts are included. If any items are missing, notify your Bosch Security
Systems sales or customer service representative.
The original packaging is the safest container in which to transport the unit and can be used
if returning the unit for service.
3.2
Parts included
Quantity
1
1
1
1
1
1
2
3
1
1
3.3
Preparation
Before installation, prepare and plan the installation process and materials needed.
Pre-requisites
–
–
–
2023-10 | 01 |
Component
FLEXIDOME corner 7100i IR camera
Corner mount box
Face plate
IR cover
TR20 Allen key for camera installation
RJ-45 punch-through aid
M20 rubber grommets (attached to the camera)
MAC address labels
Quick Installation Guide
Safety and security information manual
The components are removed from the box. Make sure that all parts are included and
are not damaged.
The PoE cable is installed. Determine appropriate cable length based on distance to
local connection point. Avoid excessively long cables.
The necessary material and equipment:
–
To guarantee the IK10+ standard, 6 screws M4 and 6 mounting plugs M4 are
necessary. For installation with conduit box, 10 screws M4 and 8 mounting plugs
M4 are necessary.
–
Appropriate size power drill.
–
Screwdriver and bit holder for TR20 bit.
–
Micro SD card (optional)
Note: Bosch recommends the use of industrial SD cards with health monitoring.
Installation Manual
FLEXIDOME corner 7100i IR
Bosch Security Systems
Advertisement
Table of Contents
