Table of Contents
Advertisement
If no number has been stored in the digit key, your phone displays a screen asking you whether
to set up Turbo Dial, as shown in Figure 2. Tap OK to call up the setup program for Turbo Dial.
3. Enter the Turbo dialing number you need for the digit key. Tap Ok to save your setting.
Dialing a Number Stored in SIM Card
You may directly dial numbers stored in your SIM card (Total numbers that may be saved in the SIM
card depends on the SIM card). The function enables you to dial a specific number without entering it
one digit after another.
1. Press
in the Main Screen to show the Dialpad screen;
2. Tap the Digit keys to enter the serial number of the location
used to store the number in the SIM card;
3. Tap
to show the Confirm screen for SIM card dialing as
shown in the right figure;
4. Tap Send to dial the number.
Tips:
If you have entered a blank location No. (On your SIM
card) where no number has been stored, your phone displays "The SIM entry
is empty".
Multiparty Conversation (Making a Conference Call)
ENGLISH
Phone Function
42
Note:
During the conversation, voice of any conference party will be heard by
all other parties. You may also add additional parties to your conference
or split any conference member as appropriately.
Initiating a Multiparty Conservation (Conference Call)
To initiate a multiparty conservation, operate as follows:
1. Dial the first party of the multiparty conservation;
2. Put the first call on hold and dial another phone number (another party of the multiparty conserva-
tion to be made). Refer to Holding a Call and Dialing another Number for relative information;
3. Tap Link as shown in Figure 1 to establish a multiparty conservation among the current active
party and the party on hold. To add a new member to the multiparty conservation, you may
Cancel
Make Call
perform it by making a new call. When you receive a new call, you may answer the incoming
(or waiting) call. However, once the new call is connected, the original multiparty conserva-
Redial
tion is put on hold. Tap Link to establish a new multiparty conservation between the new call-
ing party, which is currently active, and the multiparty conservation on hold.
Splitting a Multiparty Conservation (Conference Call) Member
Function availability varies depending on your network oper-
ator and your subscription for the function. The function
allows you to link the current active call and those calls on
holding. You may make a multiparty conversation.
Connected
Conference
Call
Hold
Mute
Spkr
End
Figure 1
Connected
Conference
Call
New Call
End All Calls
Disconnect
Hold
My Number
End
Figure 2
Phone Function
ENGLISH
43
Advertisement
Table of Contents
