Turning On Your V.100 Personal Communicator; Entering Your Sim Card Personal Identification Number (Pin); Entering Your Unlock Code; Turning Off Your Personal Communicator - Motorola V.100 User Manual

V. personal communicator gsm900/1800 mhz

Hide thumbs Also See for V.100:

Table of Contents

Turning On Your V.100 Personal Communicator

Press and hold , until your communicator vibrates or makes a sound.

Note: If the SIM card is not installed, your communicator displays a message to install

one.

1. When prompted, enter your PIN and press (.

• If you make a mistake, press and release ) to remove the last character, or hold

down ) to remove the multiple characters.

• If you enter the wrong PIN, your communicator lets you know with a displayed

message.

Note: If the correct PIN is not entered within three attempts, your communicator locks up.

See "Change Unlock Code" on page 58.

When prompted, enter your unlock code, then (.

Note: If you forget your unlock code, press %(, enter your security code,

enter a new unlock code, then press (.

When a network name is displayed, it means your communicator is ready for use.

Press and hold ,.

Table of Contents