Table of Contents
Advertisement
Chapter 18 Data Synchronization
Your phone is supplied with data synchronization capability, which allows
you to perform data update and transfer between data stored in your
phone's Phone Address Book, SIM Address Book, Calendar, and Tasks
with that stored in other phones, your computers, or other devices.
You may perform data synchronization by connecting your phone to
other devices via data cables, Infrared connections, or OTA.
In the Main Screen of your phone: Tap the
chronization function, as shown in the right Figure 1.
1. Tap
to pop up a menu containing OTA Sync Setup. If you want to use the
OTA method, you should configure the OTA synchronization. Select OTA Sync
Setup to show a screen in Figure 2. Enter the content and tap OK.
2. Select a connection type from the list under the Sync Via.
3. Your phone displays "Synchronizing..." If you tap Cancel right now or
a failure occurs during the synchronization, a Sync Failed dialog box
appears; if the synchronization is finished successfully, a detailed list
displays on the screen.
4. Tap OK; your phone returns to the Synchronization Function Screen.
5. In the Synchronization Function Screen, tap
ENGLISH
Synchronization
96
Last Sync:
Synchronize Via:
USB Cable
IR Link
OTA
symbol to enter the syn-
Sync
Figure 1
Data Paths:
Address Book:
Calendar:
Tasks:
Server URL:
OK
Figure 2
to return to the Main Screen.
Chapter 19 Modem
Your phone is embedded with a modem, which may be used for Internet
access to browse information or download data in a wireless and mobile
manner, by connecting your phone to a computer with cables or via
Bluetooth/Infrared.
It is easy to make use of the modem. If you want to access the Internet
via data call, you may configure the "mobile" modem just as you do for
setting a standard modem on a normal computer.
Tips
To connect your phone to a computer via Bluetooth or
Infrared, make sure your computer supports Bluetooth or
Infrared transmission and has been installed with correct
drivers.
Tap
on the Main Screen to enter the Modem Setup Screen, as
shown in the Figure 1.
1. Tap the combo box following Use to select a transmission method as
necessary, such as USB Cable, RS-232 Cable, IR Link, or Bluetooth.
Tips
If you decide to employ a serial cable for data transmission
make sure the baud rate is defined.
Modem Status:
Not ready
Use: USB Cable
Baud rate: 115200
:
Find Device
Figure 1
Modem Status:
Not ready
Use: USB Cable
USB Cable
Baud rate: 115200
RS-232 Cable
IR Link
Bluetooth
OK
Figure 2
Modem
ENGLISH
97
Advertisement
Table of Contents
