Motorola A760 User Manual page 14

Turning on Your Phone
Open the phone cover Press and hold the
Your phone starts and opens the Main Screen.
Additional steps may be required to power on the
phone if you enabled SIM PIN and unlocking code for
enhanced security and functional flexibility.
Your phone displays "No SIM Card" if you have insert-
ed no SIM card. In such a case, two options are avail-
able: Antenna Off or Antenna On.
Turning off Your Phone
Open the phone cover in the standby
mode. Press and hold the
while until the phone screen disappears.
Screen Display and Operation
The phone is designed with a brand new con-
cept that combines functionalities of both a
mobile and a Palm PC. You may operate just
like you do on a Palm PC, using a stylus sup-
plied with the phone to touch the transparent
ENGLISH Getting Started
24
key.
Recent Call Camera Calendar
Email Browser Note Pad
Network Theme Recorder
Screen 1 Screen 2
key for a
Modem
Sync Bluetooth
Media Alarm Clock Setup
WorldTime Calculator movianVPN
Screen 3 Screen 4
GUI interface on the LCD touch screen for function selection, writing, drawing, and message
entry. The WYSIWYG interface combines information display with your operation. Sufficient
information display is available that varies according to the current function. You may proceed
with simple operations just according to screen instructions.
Tasks
Functions of Internal Display
When you turn on your phone, it displays Main Screen 1, as shown in Figure 1. To access other
Drawing Pad
three Main Screens, tap the Page label on the left side of the screen and you may navigate
through Main Screen 2, 3, and 4 (see Figure 2, 3, and 4). These screens contain certain func-
File Manager
tional icons, each of which may be used to access a specific function.
1. The top buttons bar includes:
Main Screen button: Tap the button and the phone will display the Main Screen.
Address Book button: Tap the button and the phone will display the contact list.
Message button: Tap the button to bring the phone into the message function.
Security
Phone Function button: Tap the button and the phone will display the dialpad.
STK
Prompt button: The button will be displayed at the top of the screen when the phone receiv-
ing a missed call or a new message. Tap the button to display a list of relevant information.
2. Icons in the status bar indicate operating mode, including:
Signal Strength Indicator: The indicator shows the signal strength. The more vertical
Getting Started ENGLISH
25