Touch Screen Calibration; Backlight Setup; Power Management - Motorola A760 User Manual

Table of Contents

Advertisement

Touch Calibration
You should calibrate the touch screen whenever you find the phone
responds incorrectly when you use the stylus to touch a certain position
on the touch screen.
1. Tap Touch Calibration from the Setup Screen to enter the screen for
touch screen calibration, as shown in Figure 1.
2. Follow screen instructions and tap the center of the symbol using your
stylus until you see a message indicating the touch screen has been
calibrated.

Backlight Setup

Tap Backlight Setup from the Setup Screen to
enter the screen as shown in Figure 2.
1. Tap
and
to adjust the brightness of the
backlight;
2. Tap the
symbol under the LCD Sleep
Time to adjust the duration for the backlight;
3. When you complete your setting, tap Done to
save your settings; or tap
to return to the
Setup Screen without saving your changes.
ENGLISH
Setup
110
Tap the center of the target
to align screen
Figure 1
Backlight:
Talking phone
On
On
Off
LCD Sleep time
10 Min
Done
Done
Figure 2
Figure 3
Voice Command
Tap Voice Command from the Setup Screen to enter the screen for voice
command setup, where you may turn on or off the reciting function, as
shown in Figure 3. If you turn on the function, your phone would recite
any message you are viewing.
Receive IrDA
The setting allows you to turn on or off the infrared receiving function.

Power Management

Tap Power Management from the Setup Screen to enter the screen for
power management, as shown in Figure 1. The progress bar under
Battery Meter indicates the remaining power of your battery.
You may turn On or Off the power saving mode by tapping the
bol following Battery Save. By tapping the
Power off, you may turn On or Off the Auto Power off function. If the
function is turned on, you may tap the direct line following off Time or
icon
to specify the idle time before you phone is automatically pow-
ered off.
Battery Meter
Battery Save
On
Auto Power off
On
Off Time
Done
Figure 1
Security Code:
sym-
symbol following Auto
OK
Figure 2
Setup
ENGLISH
111

Advertisement

Table of Contents
loading

Table of Contents