How To Change The Transfer Speed For A Usb Cable Connection; How To Change The Transfer Speed For Beaming (Irda Transfer Speed) - Alphasmart NEO User Manual

How t o Change the Transf er Speed for a USB Cable Connection
How t o Change the Transf er Speed for Beaming (Ir DA Transf er Speed)
NEO and NEO 2 by AlphaSmart
Changing the Transfer Speed for Sending or Beaming Files
1. Make sure your NEO is not attached to your computer. (You can change
the transfer speed only when the NEO is not attached.)
2. Press option-z-s and type the number for one of these speeds:
• 1: Very Slow. This is the slowest speed setting. It is compatible with
all machines and programs. It is especially recommended when you
use graphic-intensive programs.
• 2: Slow. This setting is compatible with all machines and most
programs.
• 3: Fast. This the default speed, which usually works well with most
computers.
• 4: Fastest. This setting provides the quickest transfers. However,
some word processing programs may lose data when files are
transferred using this speed, so you might want to experiment to see
which speed works best for you.
1. Make sure your NEO is not attached to your computer. (You can change
the transfer speed only when the NEO is not attached.)
2. Press ctrl-option-z-s and type the number for one of these options:
• 1: Fastest speed. This setting provides the quickest IR transfers.
However, some programs may lose data when files are transferred
using this speed, so you might want to experiment to see which speed
works best for you.
• 2: Compatibility speed. This setting is compatible with all computers
and most programs.
N E O S
E T T I N G S
75