How To Install Aa Batteries - Alphasmart NEO User Manual

How t o Instal l AA Batteries
After you install the
batteries the first
time, you may use the
small screw that came with
the NEO to secure the cover.
If you do this, you'll need to
remove the screw the next
time you install batteries.
NEO and NEO 2 by AlphaSmart
1. Turn the NEO over. On the back of the NEO, put your thumbs in the
circles on the battery compartment cover
cover toward the left to remove it from the NEO.
2. The first time you open the compartment, you'll find a small plastic bag
with a Phillips screw for holding the battery compartment cover shut.
Remove the bag.
3. Insert three AA batteries into the compartment. Make sure the + end of
each battery points toward the black and red cables.
4. Put the battery compartment cover back on and slide it back in place. You
can insert the small Phillips screw in the hole provided to make sure the
cover stays shut.
G
E T T I N G
Installing the Batteries
A and slide the compartment
A A
S
T A R T E D
4