How Teachers Can Use Neo 2 To Control The 2Know! Toolbar Program - Alphasmart NEO User Manual

How Teachers Can Use NEO 2 to Control the 2Know! Tool bar Program
NEO and NEO 2 by AlphaSmart
U
S I N G T H E
Teachers can use NEO 2 to control the 2Know! Toolbar program. The steps
are similar to those you would use on a Responder:
1. In the 2Know! Toolbar program, click the Options button
Teacher Responder from the menu.
2. Click Assign in the Teacher Responder dialog box. The program will
show you a PIN. Leave this dialog box open.
3. Press on/off on the NEO 2 to turn it on.
4. Press applets.
5. Make sure the cursor is next to Responder; then, press enter.
6. NEO 2 will attempt to join the session. If you have connected to a
Renaissance Receiver before, it will ask if you want to stay connected to
it; press y for yes or n for no. Then, press enter.
If you haven't connected to a Renaissance Receiver before, NEO 2 will
show you a list of networks (Renaissance Receivers). Use the arrow keys
to highlight the one you want to connect to; then, press enter.
7. When NEO 2 asks you to enter the Teacher Responder PIN, enter the
one that is shown in your 2Know! Toolbar program. Then, press enter.
8. In the 2Know! Toolbar program, click Close twice to go back to the
toolbar.
9. NEO 2 will list your options. Press a to ask a question, b to show a graph,
or c to minimize the Toolbar on your computer; then, press enter. The
table on the next page shows what keys to press as you ask questions or
view a graph.
R S A
E S P O N D E R M A R T
Using NEO 2 with the 2Know! Toolbar
N E O 2
P P L E T O N
A and choose
A
64