Sending Text When Connected By A Usb Cable - Alphasmart NEO User Manual

If your text isn't
correct in your
computer file, the
problem may be that your
computer program needs a
slower transfer speed. See
page 75 to change the
transfer speed for USB cable
connection transfers.
NEO and NEO 2 by AlphaSmart
Macintosh:
Windows:
As soon as you've successfully connected your computer to NEO, you can
send text to your computer.

Sending Text When Connected by a USB Cable

1. If you have AlphaSmart Manager installed on your computer, make sure it
is closed. If AlphaSmart Manager is running, you can't send text to a
computer file.
2. On your computer, open the file that you want to receive the NEO text
into. (It can be a new file or a file that already has text.) Place your cursor
where you want the text to begin.
3. Turn on your NEO and open the file you want to send.
4. Connect your NEO to your computer using the USB cable as described
on page 9.
5. Press send. NEO displays a progress bar and a percentage of how much
text has transferred.
6. On your computer, save the file.
7. If you don't want to keep the file on your NEO, press clear file, then press
Y for yes. (You don't have to clear the file if you want to keep it.)
8. If you want to send another file to the computer, you can switch files on
the NEO. Press z and the file # key for that file at the same time. When
the file is open, press send to send it.
9. When you've finished sending files, disconnect the NEO from your
computer.
You can also use AlphaSmart Manager to send text to your computer when
connected by USB cable. See "Working with AlphaSmart Manager" on
page 82 for more information.
G S
E T T I N G T A R T E D
Sending Files to Your Computer
10