Windows 98 Se - ActionTec GT704-WG User Manual

Setting Up Static IP
on the Computer
To communicate with the Gateway from a computer on the network (to use
the Web Configuration Utility, for example), the user may have to switch the IP
address settings from
Gateway are on the same network subnet.
To set up static
IP
instructions.
☞
Note: The following procedures are based on the Gateway's
factory default
changed, enter the new
address.

Windows 98 SE

1. From the desktop, click on the Start button in the lower left corner.
2. From the menu that appears, select Settings.
-enabled to static
DHCP
on a computer, select the operating system and follow the
address. If the Gateway's
IP
IP
, so that the computer and the
IP
IP
address when instructed to enter an
91
address has been
IP
b