ActionTec GT704-WG User Manual page 42

Chapter 4 Using Advanced Setup
After selecting a connection type, click Next to continue configuring the connection.
Transparent Bridging
Select this option to use the Gateway as a transparent bridge. This option should
only be used if the Gateway is being used as a Modem to connect computer to
your
the Internet via a connection. When the Gateway is being used as a transpar-
DSL
ent bridge, it does not provide any firewall security.
Obtain an IP Address through PPPoE or PPPoA
Select one of these options to allow the Gateway to use the Point-to-Point over
Ethernet ( ) or Point-to-Point over ( ) protocol.
PPPoE ATM PPPoA
"Broadband Connection via PPPoE" screen:
39