ActionTec GT704-WG User Manual page 60

256-bit 256-bit
WEP -
hexadecimal pairs. A hexadecimal digit consists of alphanumeric characters rang-
ing from 0-9 or
A-F
appropriate circle, then enter 29 hexadecimal digit pairs in the Key text box. After
activating 256-bit
WEP
join the network only if this key is entered in the computer's wireless encryption
scheme.
☞
Note: Not all wireless
Ensure that all
support 128
WEP+802.1x
Activating WEP+802.1x in the Wireless Settings screen generates the "Wireless
802.1x Security Settings" screen. This setting is for enterprise networks only, and
should be accessed by an experienced information systems specialist.
To set up 802.1x security, enter the
WEP+
"Server Address" text box, and the "Secret" key (for communication between
IP
the server and the Gateway) in the "Secret" text box. The "Port" and
RADIUS
"Group Key Interval" values should remain the same
WPA
Activating WPA (Wi-Fi Protected Access) in the Wireless Settings screen generates
the "Wireless
WPA
Chapter 4 Using Advanced Setup
requires one or more keys, each key comprising 29
WEP
. To create a 256-bit
on the Gateway, a computer with wireless capability can
Cards support 128- or 256-bit
PC
Cards installed in the networked computers
PC
256-bit before activating.
- or WEP
Settings" screen.
key, activate Key 1 by clicking in the
WEP
address of the
IP
57
.
WEP
server in the
RADIUS