Acer Altos R910 Series User Manual page 103

7 Observe the post-installation instructions described on page 38.
Installing the RAID BBU
1 Observe the ESD precautions and pre-installation instructions
described on page 37.
2 Remove the memory boards or memory air baffles from DIMM
slots C and D. See "Cold Removal of Memory Board" on page 75
and "Removing a memory board air baffle" on page 46.
3 Open the battery holder by pinching the top and bottom covers of
the holder (A).
4 Connect the cable inside the battery pack (B).
5 Secure the battery cable to its chassis holder (A).
6 Attach the cable to the RAID BBU connector on the mainboard (B).
93