D-Link DES-3624 Series User Manual page 79

Stackable NWay Ethernet Switch User's Guide
Figure 6-35. Default port VLAN assignment screen
This screen allows you to set a Default port VLAN ID number (PVID) for each port. Press CTRL+S to let the
changes take effect.
Note: If a port is a member of a trunk group but is not the anchor, the items shown in the above table
will be read-only and the values will be the same as those for the anchor port.
Choose Configure Static VLAN Entry to access the third item on the IEEE 802.1Q VLANs
Configuration menu. The following screen appears:
Using the Console Interface 79