D-Link DES-3624 Series User Manual page 103

Stackable NWay Ethernet Switch User's Guide
To set basic Switch settings, enter a System Name in the first field, the physical location of the Switch in the
System Location field, and the name of the contact person responsible for the Switch in the System
Contact field. Then click Apply.
Two hyperlinks at the bottom of this window provide access to the Information Of Individual Switch Unit
and Configure Switch Stack – Advanced windows, respectively. These windows are described in the two
sections that immediately follow.
The information in the window above is described as follows:
Device Type A description of the Switch type.
MAC Address The Ethernet address for the device.
Boot PROM Version Version number for the PROM code.
Firmware Version Version number of the firmware installed on the Switch. This can be updated by
using the Firmware and Configuration Update window in the Maintenance section.
System Name A user-assigned name for the Switch.
System Location A user-assigned description of the physical location of the Switch.
System Contact Name of the person to contact should there be any problems or questions with the
system. You may also want to add a phone number or extension.
Web-Based Network Management 103