D-Link DES-3624 Series User Manual page 78

Stackable NWay Ethernet Switch User's Guide
Figure 6-34. Ingress Filtering Check screen
This screen allows you to set Ingress filtering for each port to either Enabled or Disabled. When a packet
arrives at the port and Ingress filtering is Enabled, the port will check the VLAN ID number of the packet,
and its own VIDs. If there is a match, the port will receive the packet. If the packet doesn't have a VLAN tag
or the port is not a member of the VLAN for which the packet is tagged, the packet will be discarded.
Note: If a port is a member of a trunk group but is not the anchor, the items shown in the above table
will be read-only and the values will be the same as those for the anchor port.
Choose Configure Port VLAN ID to access the second item on the IEEE 802.1Q VLANs Configuration
menu. The following screen appears:
78 Using the Console Interface