Use Configuration File On Tftp Server; Save Settings To Tftp Server - D-Link DES-3226 User Manual

DES-3226 NWay Standalone Fast Ethernet Switch User's Guide
Enter the path and the filename to the firmware file on the TFTP server.
Note: The TFTP server must be running TFTP server software to perform the file transfer. TFTP
server software is a part of many network management software packages, or can be
obtained as a separate program.
Highlight APPLY and press Enter to record the IP address of the TFTP server. Use Save Changes from
the main menu to enter the address into NV-RAM
Highlight START and press Enter to initiate the file transfer.

Use Configuration File on TFTP Server

To download a switch configuration file from a TFTP server, highlight Use a Configuration File on
TFTP Server and press Enter.
Enter the IP address of the TFTP server and specify the location of the switch configuration file on the
TFTP server.
Highlight APPLY and press Enter to record the IP address of the TFTP server. Use Save Changes from
the main menu to enter the address into NV-RAM
Highlight START and press Enter to initiate the file transfer.
Note: Configuration files used in the earlier version of this switch (firmware version 1.0) are not
supported by the present version (firmware version 2.0). The Switch Information screen displays
the firmware version.

Save Settings to TFTP Server

To upload a settings file to the TFTP server, highlight Save Settings to TFTP Server and press Enter.
Figure 6-68. Use Configuration File on TFTP Server screen
85