Authenticator State - D-Link DES-3226 User Manual

DES-3226 NWay Standalone Fast Ethernet Switch User's Guide

Authenticator State

This window displays the Authenticator Status for an individual port. To select a port, click a port on
the front panel display. A polling interval between 1 and 60 seconds can be set using the drop-down
menu at the top of the window.
The information on this window is described as follows:
•
AuthState – The Authenticator PAE state value can be: Initialize, Disconnected, Connecting,
Authenticating, Authenticated, Aborting, Held, Force_Auth, Force_Unauth, or N/A. N/A (Not Available)
indicates that the port's authenticator capability is disabled.
•
BackendState – The Backend Authentication state can be Request, Response, Success, Fail,
Timeout, Idle, Initialize, or N/A. N/A indicates that the port's authenticator capability is disabled.
•
AdmDir – Admin Controlled Directions can be either both or in.
•
OprDir – Oper Controlled Directions can be either both or in.
•
PortStatus – Auth Controlled Port Status can be Authorized, Unauthorized, or N/A.
•
Port Control – Auth Controlled Port Control can be ForceAuthorized, ForceUnauthorized, or Auto.
Figure 7-53. Authenticator Status window
137